Now for best results your picture needs to be resized. Change the boot up splash screen to any picture you want even a picture of YOUR spyder! You will see other xxxx.srf files in there.Ĥ) Now just drag and drop (copy) the Spyder_RT.srf into the vehicle folder.ĥ) Unplug the GPS from your PC and restart it.Ħ) Go into the GPS system menu and change your vehicle to the spyder! If you have never done this before read the above for backup to get it installed opn your PC.Ģ) Once you see the Garmin drive in "My Computer" open it.ģ) Now open the folder Garmin folder and then the vehicle folder. Unzip this and you will have a file called Spyder_RT.srfġ) Like above for backup, connect your GPS to your PC. You are now backed up so any changes you make can be undone!įirst cool thing is to add the Spyder as a vehicle icon on your map. It may take 30 minutes or more depending on how many maps you have. Double click on this.Ħ) Now select everything in this drive and copy it to your PC. If it does just unplug it, power off the GPS, and do it again.ĥ) Once windows is done, open your "My Computer" and you should now see a removable drive called "Garmin". Let it install drivers which is should do on it's own.Ĥ) First time hooking to the PC the GPS may reset and windows may disconnect. This works for my Garmin Nuvi 775T and should also for a Zumo 660.ĭoing ANY of this (mod boot screen, voices, vehicle icon) should NOT damage your GPS in any way!īut to be careful you should backup your GPS.ġ) With the GPS off, plug your GPS into your PC with the USB cord.Ģ) The GPS will power up in a special PC connection mode.ģ) Windows will bong and find the new device. Or even if your using a BRP Garmin GPS you can mod your GPS and tailor it to YOU! img file in this directory.OK here is a little DIY stuff for folks using a non_BRP GPS. You only need to create a folder called Garmin and copy your. If you do not want to remove nor touch the original maps (the ones that came when you bought your device), you can play safe and use an external SD card. vpm extensions) that you never use, so maybe taking up quite a bit of space. These probably contain lots of different voices and languages (files with. You can delete the voice files to make room. You can always make a backup and copy the files to your computer. You may not have enough space on your device, but you can remove some files and replace the existent map. Once connected to your computer, it will appear as an additional drive. Once you have your map file, you have two options:Ĭopy and paste your file to your device ( /Garmin folder). In some places, you may find locked files, but there are tools to unlock those. So updating or adding maps is as simple as copying and pasting a file, which has to be named gmapprom.img or gmapsupp.img. When your Garmin reboots, you should now have the OSM map displayed. Again, on a Mac, you do this by dragging it to the trash. Eject the Garmin as you would a USB stick.Rename it to gmapsupp.img if it's not already called that.If there isn't a folder on the Garmin called 'Garmin', create one.On a Mac, for example, this will be on the desktop. The Garmin should show up as a removable disc (like a USB stick) in the usual place.(On an eTrex, this is typically done by going to the menu screen, then Setup -> Interface -> USB Mass Storage.) Put your Garmin in USB Mass Storage mode.Connect your Garmin to your computer via a USB cable.Assuming you have an SD card installed in the card socket for your Garmin, simply do this: img file is not meant for a program on your computer. Double-clicking tells your computer to "find the program that will understand. It sounds like you are trying to double-click, or otherwise open, an.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |